Showing posts with label Sumitomo Splicing Machine. Show all posts
Showing posts with label Sumitomo Splicing Machine. Show all posts

Monday, June 25, 2018

How to choose a Right Splicing Machine (Fusion Splicer)

With over 30 years’ experience of fusion splicer innovation, production and supply; Sumitomo Electric fusion splicers are used worldwide by network installers, fiber optic manufacturers, data center constructors, and carrier-grade network operators.
Sumitomo Electric’s product range is comprehensive; from handheld micro-splicers through splicers for FTTx and data center build to High Definition Core Aligning splicers for the backbone network and ribbon splicers for high-density networks.

Difference between Single Fiber Fusion Splicer & Mass Fusion Splicer

Single fiber splicers and mass or ribbon splicers are two main types of fusion splicers in the market. You should choose the right one for them according to your specific applications.

What is Single Fiber Fusion Splicer, Briefly-

Single fiber splicers usually splice 250-micron fiber, but can also hold 900 microns jacketed fiber, flat drop cable and splice on connectors (also known as splice-on-connectors) used mostly for FTTH applications as well. One piece of fiber is stripped, cleaned, cleaved then inserted into the fiber holder. Another fiber repeats the same process to lay in the opposite fiber holder. Most newer single fusion splicer models can splice in less than ten seconds and estimate attenuation (loss of light). Of course, this is only an estimation and the fiber should be tested more accurately with an OTDR.






Single Fiber splicers are given below as - 

First Model - Z1C CORE ALIGNMENT FUSION SPLICER
Second Model - SUMITOMO SPLICING MACHINE 82C
Model third- SUMITOMO SPLICING MACHINE T-400S


The question in Mind, What is Mass Fusion Splicer



Mass or ribbon splicers can splice 1 to 12 fibers all at once. The fiber holders determine the number of fibers you can splice at once. Mass splicers are not nearly as popular as the single fiber splicers, but if used on cable where more than one fiber needs to be spliced they are extremely efficient. When fiber counts of over 96 are needed, there can be up to a 65% savings per splice costs. Let’s say on average a single fiber splice costs $25 and a ribbon splice is $110 each. At a location that needs 144 splices, the single fiber splicer would run a cost of $3600. A ribbon splicer would only perform 12 splices at a total of $1320. The following mass fusion splicer is a Sumitomo splicing machine 81M12. Sumitomo splicing machine 81M12 is also known as Ribbon fusion splicer.





Difference between Core Alignment Fusion Splicer & Cladding Alignment Fusion Splicer

Currently, there is two aligning systems used for fusion splicer which is core alignment system and cladding alignment system.


First Model - Core Alignment Fusion Splicer 

Core alignment splicing is currently the most commonly used fusion splicing technology. Core alignment splicers use a combination of image and light detection systems that “view” the fiber cores to measure and monitor core position during the alignment process. 

This provides for precise fiber alignment, resulting in a typical splice loss of the only 0.02dB. Compared to cladding alignment, it is more expensive, more powerful and flexible, and less sensitive to variations in the cable and environment. Core alignment fusion splicers have long been the preferred method for CATV installations, backbone networks, specialty fiber applications, and optical components manufacturing largely because of their high accuracy and reliability. Sumitomo Splicing Machine z1c is also known as Core Alignment Fusion Splicer. Find the best Core Alignment Fiber optic splicing Machine with high-class Sevices from Candid Optronix.


Sumitomo Second Model- Cladding Alignment Fusion Splicer- More basic fusion splicers employ clad alignments to line up the fibers for splicing. The fibers sit in a holder or V-groove and are lined up “physically”, based on the outer diameter of the fiber’s cladding. Fiber cores are adjusted inwards and outwards. 

The advantage of this method is that the technology required is low cost and fast alignment and splicing, so it is still utilized on low-cost field fusion splicers and ribbon splicers. However, since the outer diameters are aligned doesn’t mean the cores will be perfectly aligned. Cladding alignment splicers typically produce higher loss splices and lack the features and flexibility of higher end splicers. Sumitomo Splicing Machine T-400S also known as Cladding Alignment Fusion Splicer. 

Conclusion

When it comes to choosing a splicer from Candid Optronix Pvt Ltd, all factors mentioned in this article should be considered. Candid Optronix is India's No1 distributor of Sumitomo ElectricGroup, choosing a reliable company becomes particularly important. One company that can help you decide which splicer is the best fit for you is Candid Optronix Pvt. Their supportive our Sales staff will help narrow down the choices of equipment to fit your particular needs based on application and budget. So Visit Website, https://www.optronix.in 


Sumitomo has the fastest splicing Machine other than a fusion splicer company. Candid Optronix Pvt Ltd is authorized, the sole distributor of Sumitomo Electric Group. Sumitomo Electric Group builds the high quality & used the high-class material with the fully tested fusion splicer after delivering the fusion splicer in India.
Sumitomo Electric Group makes all fusion splicer model is user-friendly, compact, light-weight & Versalite. Sumitomo is used unique technology to help to several types of fiber cable.
For more information regarding fusion splicer briefly, click here – https://candidoptronix.wordpress.com/2018/06/23/do-you-know-about-fusion-splicer-splicing-machine/
Arises in question in Mind, Again & again, How to choose a fusion Splicer?
Answer – 1. A long-term focus on full services and provides a high-quality product for Customers.
2. A strong Research & Development team delivers our customers with a high performing product, while our post-sales team provides comprehensive support.
3. We take our customer feedback on priority which us on top. our factory has been visited and acclaimed by numbers of clients from various countries and distributors which defines our production capabilities.


Saturday, June 23, 2018

Do you know about Splicing Machine?

Fiber splicing is the method of permanently joining two fibers together. Unlike fiber connectors, which are designed for easy reconfiguration on cross-connect or patch panels. Many customers say the fiber optic machine, fusion splicer, splicing machine.
There are two types of fiber splicing — mechanical splicing and fusion splicing.
Mechanical splice doesn’t physically fuse 2 optical fibers along, rather 2 fibers square measure control butt-to-butt within a sleeve with some mechanical mechanism. you’ll exasperate insertion loss and back reflection in mechanical splices than in fusion splices (the second kind we have a tendency to square measure introducing below).
Mechanical splice is usually used for emergency repairs and fiber testing. you’ll be able to investigate some mechanical splice product here The second form of splice is named fusion splice.
In fusion splice, 2 fibers are actually welded (fused) along by an electrical arc.
Fusion splice
Fusion splice is that the most loosely used methodology of splice because it provides for rock bottom insertion loss and just about no back reflection. Fusion splice provides the foremost reliable joint between 2 fibers.
Fusion splice is completed by Associate in Nursing automatic machine referred to as fusion splicer (fusion-splicing machines). If you want to know about the several types of Splicing Machines are z1c splicing machine, ribbon fusion splicer, splicing machine T400s & splicing machine 82c.

Friday, June 22, 2018

Find the best splicing Machine in India

Candid Optronix is one of the Most popular authorized sole distributors of Sumitomo Electric Group in India. To find the best splicing machine in Delhi, Ahmedabad, Gujarat, Kolkata, Jaipur, Mumbai, Patna.
With over 30 years’ experience of fusion splicer innovation, production & supply; Sumitomo Electric fusion splicer is used worldwide by network installers, fiber optic manufacturers, data center constructors, and carrier-grade network operators.
Sumitomo Electric’s product range is comprehensive; from handheld micro-splicers through splicers for FTTx and data center build to High Definition Core Aligning splicers for the backbone network and ribbon splicers for high-density networks.
To join the others who build their network with Sumitomo Electric fusion splicers, click on the products below.
1. Ribbon Fusion Splicer Machine (SUMITOMO SPLICING MACHINE 81M12).

2. Sumitomo splicing Machine z1c (Z1C CORE ALIGNMENT FUSION SPLICER).



3.  Water Proof Sumitomo Splicing Machine T400S.


4.  Sumitomo Splicing Machine 82c



Read More feature & specification, Visit Website — https://www.optronix.in/sumitomo-splicing-machine.php
To buy the world class Sumitomo Splicing Machine from Candid Optronix Pvt Ltd. For Online inquiry, Click Here – https://www.optronix.in/Order-now.php


Wednesday, June 13, 2018

India's best Sumitomo Splicing Machine T400S with fully Water Resistant

Candid Optronix is offering a best Splicing Machine T400S in India. We are authorized sole distributor of Sumitomo Electric Group. Sumitomo builds the model T-400S is user-friendly splicer for FTTH use. It's a very popular Sumitomo Splicing Machine T4ooS.

Its Compact design and unique design and unique technology help to handle several types of fiber cable used in FTTH, like Drop Cable, 2-3mm Cord or 900/250um buffer fiber.

Splice cycle time of 7sec and heating cycle time of 24sec improves splicing efficiency and productivity, thereby reducing labor time and costs.

Sumitomo's state of art active V-groove technology helps to align the fiber even up to 125um gap.

 Best Sumitomo Splicing Machine


The internal memory of T-400S can save up to 10,000 splice data and 100 splice images, and its capability of 150 Splice programs and 50 heating programs gives a wide range of selection/editing to the user.

T-400S has high environmental durability with IPx5 dust resistance and IPx1 Water resistance. A machine is shock-proof for drop from 76cm on the bottom surface.

Its 3200mAh battery can complete 200Splice/Heating operations per cycle charge, and Electrodes can be used up to 6000Arc Discharges. 

Overall, the T-400S Splicer is of great benefit for FTTH applications.

To Get feature & Specification, Click Here - https://www.optronix.in/sumitomo-splicing-machine-T-400S.php

For Online Enquiry detail, click Here- https://www.optronix.in/Order-now.php















Saturday, May 26, 2018

Master Distributors of Sumitomo Electric Group

Sumitomo Masatomo (1585-1652), a founder of the House of Sumitomo, had started out as a Buddhist priest and went on to later write the "MonjuinShiigaki" which is a document describing the principles for doing business honorably. The document has served as the basis of the Sumitomo Business Spirit and the Sumitomo Business Principles which are as follows :

Sumitomo shall achieve strength and prosperity by placing prime importance on integrity and sound management in the control of a business.

Sumitomo shall manage its activities with foresight and flexibility in order to cope effectively with the changing times. Under no circumstances, however, shall it pursue easy gains or act imprudently.
Sumitomo Electric Industries, Ltd. (SEI), incorporated in 1897, is a Sumitomo Group company which is carrying on the Sumitomo Business Spirit cultivated through 400 Years. 

SEI undertakes operations on a global scale in five main areas: automotive; information & communication; electronics; electric wire and cable, energy; industrial materials. Through its provision of products and services responding to the demands of customers and all society, SEI aims to be an excellent company recognized and solidly trusted by the global community.

SEI Trading India Private Ltd. (SETI) is a wholly-owned subsidiary company of SEI and is incorporated on 28th July 2011. SETI engages itself in the following of the Sumitomo Business Principles and facilitation of the various business activities of SEI in India and in some neighboring countries like Bangladesh, Sri Lanka, Bhutan, and Nepal, especially in the areas of information &communications; electric wire and cable, energy and industrial materials.

Candid Optronix Pvt Ltd. has authorized sole distributors of  Sumitomo Electric Group company. Our company is offering CATV product, fiber optic, OTDR & Sumitomo Splicing Machine. We have various type of fusion splicers are splicing machine z1c, splicing machine 82c, Splicing Machine 81M12 & many more.

Optronix at SCAT 2026 Mumbai: Visit Booth A09 for Fiber Optic, Broadband and CATV Solutions

The broadband and telecom industry continues to evolve with growing demand for high-speed connectivity, reliable fiber infrastructure, and a...